Ozone / CAS# 10028-15-6
NOTE: All prices include media and free pump loan, unless otherwise noted, and excluding passive sampling badges. See Media Fee Schedule.
NEW: Group pricing available for compatible metals and VOCs. Click Here for more information.
Badges sampled for less than 270 minutes will be subcontracted. ANALYTICAL TECHNIQUE:IC COLLECTION MEDIUM:PM ORDER NUMBER:N586 VOL. / TIME / AREA / MASS:8 hrs. SAMPLING RATE: -- LOQ:0.8 ug
Filters must be received at the laboratory by the date specified on the media. ANALYTICAL TECHNIQUE:IC COLLECTION MEDIUM:Treated GFF ORDER NUMBER:Not Specified VOL. / TIME / AREA / MASS:90-120 L SAMPLING RATE:0.25-0.5 LPM LOQ:4 ug
Ozone
Sampling & Analysis
Ozone is a colorless-to-bluish gas that condenses to a dark blue liquid or to blue-black crystals. Ozone has a characteristic odor in concentrations less than 2 ppm. It is used as a disinfectant for air and water; for bleaching waxes, textiles and oils; for ozonolysis of unsaturated fatty acids to pelargonic and other acids; in the manufacture of ink; as a catalyst; in water treatment for taste and odor control; for mold and bacteria inhibitor in cold storage; and as a bleaching agent.
Ozone is highly toxic via inhalation or by contact of liquid to skin, eyes, or mucous membranes. It is capable of causing acute to chronic lung damage, burns, and death or permanent injury. Ozone can be toxic at a concentration of 100 ppm for 1 minute. It is capable of causing death from pulmonary edema. Ozone increases sensitivity of the lungs to broncho-constrictors and allergens, and it increases susceptibility to and severity of lung bacterial and viral infections.
View Notes
Notes
- Each additional compatible metal $26.
- Each additional compatible GC compound $37.
- Each additional compatible acid $37.
- Each additional compatible HPLC compound $54.
- Each additional compatible metals by ICP-MS $33.
- Other additional compatible analyte pricing; see additional compatible analyte column.
– Bulks used as analytical standards for GC analysis will be billed at $84
– LOQs listed do not include the desorption efficiency, which could result in higher detection levels. Please call the lab for more information.
– For additional Method information, please refer to the links on Method types.
– Review the published method when determining the correct number of field blanks to submit with your samples.
– The media shelf lives cited are the maximum possible shelf lives. Media should always be used by the expiration date on the label.
– The following surcharges will be added to the listed fees based on the following sample turnaround times:
** Same Day 200%
** Next Day (12pm) 150%
** Next Day (6pm) 100%
** Second Day 75%
** Third Day 50%
** Fourth Day 35%
Symbols Key
Symbols Key
- :
- Preferred method.
- :
- Ship overnight refrigerated.
- :
- Call in advance of sampling to order media.
- :
- A three sample minimum submittal is required.
- :
- Collect using 2 tubes in a series.
- :
- 3M recommended maximum sampling hours.
- :
- Subcontracted analysis.
- :
- Protect samples from light.
- :
- Immediately after sampling remove from cassette and place in glass vial.
- :
- Please send, under separate cover, a sample (bulk) of your particular solvent for use as a reference standard. The bulk sample will be charged the analysis price. Additional analyses and fees may be required to determine the DE for results that do not match a common standard.
- :
- Reported results reflect elemental analysis of the requested metals. Certain compounds may not be solubilized during digestion, resulting in data that may be biased low.
- :
- Analyte is referenced in the published method. If more than one published method is cited, the analyte is referenced in at least one of the methods.
Compatibility Codes
- A:
- Charcoal and carbon disulfide desorption.
- B:
- Treated XAD-2 (2-(hydroxymethyl) piperidine and toluene desorption.
- C:
- Silica gel and 95% ethanol desorption.
- D:
- Tenax and carbon tetrachloride desorption.
- E:
- OVS Sampler and toluene desorption.
- F:
- Charcoal and 5% methanol in methylene chloride.
- G:
- Treated GFF (1-(2 pyridyl) piperazine) and acetonitrile/dimethyl sulfoxide desorption.
- U:
- Universal Solvent GC Method.