14th January 2019
NEWS + EVENTS
RECENT NEWS ARTICLES
25th October 2018
THANKSGIVING HOLIDAY SCHEDULE 2018
SGS Galson is thankful for our loyal clients and devoted staff. So much so, that we will be closed on Thursday, November 22 and Friday,... Read More19th October 2018
SGS Galson Reports as Low as 0.04 ppbv for Ethylene Oxide in Ambient Air!
SGS Galson has responded to the EPA identifying ethylene oxide (EtO) as a potential concern with a new analytical procedure that reports... Read More10th September 2018
SGS Galson Presents Free Silica Webinar on September 19, 1 PM EST
Please join us for an SGS Galson-sponsored webinar: “Navigating the Silica Standard: Resources to Help” on September 19, 1 PM EST. This... Read More29th August 2018
2018 LABOR DAY SCHEDULE
SGS Galson will be closed on Monday, September 3, in celebration of Labor Day, but will operate with normal business hours on the days... Read More1st August 2018
New Canada Service Center Location
For all your supplies, sampling equipment, the fastest results in the industry, and answers to all your IH needs, SGS Galson delivers, and... Read More11th June 2018
SGS Earns Additional PFAS Accreditation Assuring High-Quality Data
Three SGS laboratories, with a fourth one coming very soon, have earned accreditation from the Department of Defense (DoD) for PFAS... Read More10th April 2018
SAMPLING AND ANALYSIS GUIDE UPDATES AS OF 4/10/18
The following additions are now on the online SAG: Inhalable Dust that is collected using DIS (Disposable Inhalable Sampler) with PVC PW... Read More30th March 2018
Enforcement on NEW OSHA Beryllium Standard Starts May 11
OSHA will start enforcing the final rule on occupational exposure to beryllium in construction, shipyard, and general industries, on May... Read More28th March 2018
SAMPLING AND ANALYSIS GUIDE UPDATES AS OF 3/28/18
The following additions are now on the online SAG: The Lead Level of Quantitation for 8×10 Glass Fiber Filters using the in-house... Read More13th March 2018
Five-Day Turnaround and Increased Capacity Assure You’ll Be Ready for New Silica Rule Compliance!
On June 23, the new OSHA silica standard for general industry and maritime will start being enforced – and you will need to be ready.... Read More24th January 2018
SAMPLING AND ANALYSIS GUIDE UPDATES AS OF 1/24/18
The following additions are now on the online SAG: Platinum, metal was updated from OSHA-ID 121 to NISOH 7303 with a lower LOQ of... Read More23rd January 2018
New and Revised Fact Sheets on Silica Now Available
As SGS Galson continues to help the construction, as well as other industries comply with the new silica regulations, OSHA has issued... Read More5th January 2018
SAMPLING AND ANALYSIS GUIDE UPDATES AS OF 1/5/18: BULK ASBESTOS
New Method numbers for all Bulk Asbestos reports and NYS Bulk asbestos reports will be used We are dropping EPA 600-M4-82-20 and replacing... Read More18th December 2017
NIOSH 7303 REPORT CHANGE FOR METALS ANALYSIS
As a part of our commitment to continuous improvement at SGS Galson, we will be updating the NIOSH method that is referenced on air sample... Read More12th December 2017
SAMPLING AND ANALYSIS GUIDE UPDATES AS OF 12/12/17
The following additions are now on the online SAG: Hydrogen Peroxide by method OSHA 1019; Colormetric Formaldehyde and Acetaldehyde by... Read More2nd October 2017
New Dependable Resource Available for Mold Analysis
YOU NOW HAVE A LOCAL RESOURCE WITH GLOBAL BACKING TO OBTAIN DEFENSIBLE MOLD DATA DURING RECOVERY ACTIVITIES You need a reliable resource... Read More8th September 2017
Don’t Miss 9/23 Silica Compliance Deadline!
The Occupational Safety and Health Administration’s (OSHA) deadline for enforcement of the respirable crystalline silica standard for... Read More1st September 2017
EMERGENCY RESPONSE IS IN PLACE TO SUPPORT HARVEY CLEAN-UP
In response to Hurricane Harvey and to support the clean-up, SGS EHS has set up an Emergency Response Center at our Houston laboratory.... Read More9th August 2017
SAMPLING AND ANALYSIS GUIDE UPDATES AS OF 8/9/17
The SAG was updated with the following: The LOQ for Phthalic anhydride on treated GFF by HPLC (mod. OSHA 90) has decreased from 10 ug to... Read MoreSubscribe to SGS News:
NEED HELP?
Have questions about the SAG?
Get them answered by one of SGS Galson's experienced technical staff with IH-Live. There's no need to wait for a return email or use the phone anymore.
Start Live Chat NOW >
Available Monday - Friday
8am - 8pm EST