The IH Blog
Was it the Tanks or the Docks? SGS Galson AIHR Shark Solves Oil Refinery’s Benzene Mystery.
Chris Shepcoff, Environment, Health and Safety, Business Development Manager Clients are discovering the actual impact our innovations are making in the often-difficult task of pinpointing the location of toxic emissions. The SGS Galson AIHR Shark is our...
EPA FOCUS ON ETHYLENE OXIDE RESULTS IN SGS GALSON RESPONSE
At SGS Galson, we don’t wait around to replicate “the other guys’ solution”. For decades, we respond to a challenge with practical, smart, innovative solutions. The EPA recently identified ethylene oxide (EtO) as a potential carcinogen and SGS Galson responded. The...
Let SGS Galson Help Determine If You Are You in Compliance with the New Lower Osha PEL for Beryllium
The Occupational Safety and Health Administration (OSHA) has issued a final rule to prevent chronic beryllium disease and lung cancer in American workers by limiting their exposure to beryllium and beryllium compounds. The rule contains standards for general industry,...
SGS Galson Presents Free Silica Webinar on September 19, 1 PM EST
Please join us for an SGS Galson-sponsored webinar: “Navigating the Silica Standard: Resources to Help” on September 19, 1 PM EST. This webinar is being offered by Workplace Material Handling and Safety magazine. The instructor will be Eileen Betit,...
Judging Lab Quality for Silica Analysis
By Bill Walsh, Industrial Hygiene Services Business Development, CIH The new silica standard requires that analytical laboratories performing analyses under this standard must be accredited to ISO17025. SGS Galson is. We are also accredited for silica analysis by the...
SAMPLING AND ANALYSIS GUIDE UPDATES AS OF 12/12/17
The following additions are now on the online SAG: Hydrogen Peroxide by method OSHA 1019; Colormetric Formaldehyde and Acetaldehyde by method OSHA 1007 HPLC collected on Assay 581 PM These updates are reflected in today’s online SAG (12/12/17)
SGS Galson Now Offers Dependable Resource for Mold Analysis in Texas
As my home state Texas recovers from Hurricane Harvey, both residential and commercial buildings are faced with extensive water damage and the threat of mold infiltration. SGS Galson has been conducting mold analysis throughout the world for 47 years and is globally...
GETTING UP TO SPEED ON THE BEST IH SOLUTIONS
By Lisa Bell-Miller The fastest pitch in baseball this year so far was made by Joe Kelly of the Red Sox at 102.2 miles per hour. That’s really fast! From our Houston, TX facility, now in full swing, SGS Galson is also delivering Arkansas, Louisiana, New Mexico,...
Industry-Leading IH Programs And Service Now Available in Arkansas, Louisiana, New Mexico, Oklahoma and Texas Will Set You FREE!
I have some free advice. For those of you who are not yet reaping the benefits of SGS Galson’s free programs, do it soon. After all, so much you’re offered is absolutely free, including: FreePumpLoan™ FreeSamplingBadges™ Free return shipment on rentals Free software...
Get pumped – SGS Galson has Arrived in Arkansas, Louisiana, New Mexico, Oklahoma and Texas!
By: Lisa Bell-Miller In response to increasing demand for cost-effective and timely IH solutions for all of you in Arkansas, Louisiana, New Mexico, Oklahoma and Texas, we’ve expanded our Houston, TX Service Center. The expansion gives industrial hygiene and worker...