Sampling & Analysis
sampling & analysis
- overview
- Policies & QA Reference
- Sampling & Analysis Guide
- Classic SAG View
- SAG Updates History
- COVID-19 Recovery Assistance
- FreeSamplingBadges
- FreePumpLoan
- Chain of Custody
- Gas Detector Tubes
- SmartSense™
- Asbestos Testing from SGS Forensic Laboratories
- LEED v4.0 & v4.1
- MSHA 30 CFR Testing
- Personal Exposure vest™
- Universal Solvent GC Method table
- Metals Wipe Media LOQ
- Media Fee Schedule
Chlorine dioxide / CAS# 10049-04-4
NOTE: All prices include media and free pump loan, unless otherwise noted, and excluding passive sampling badges. See Media Fee Schedule.
NEW: Group pricing available for compatible metals and VOCs. Click Here for more information.


Minimum air volume is 15L. Limit of Detection is based on a final impinger volume of 15mL. ANALYTICAL TECHNIQUE:IC/Conductivity COLLECTION MEDIUM:Impinger: 15mL 0.02% KI ORDER NUMBER:Not Specified VOL. / TIME / AREA / MASS:15-120L SAMPLING RATE:0.5 LPM LOQ:1.5 ug
Chlorine dioxide
Sampling & Analysis
Chlorine Dioxide comes in the form of a yellow to red gar or a red-brown liquid (below 52°F) with an unpleasant odor similar to chlorine and nitric acid. Chlorine Dioxide is a manufactured gas and does not occur naturally in the environment. It is used as a bleaching agent at paper manufacturing plants and in public water treatment facilities to make water safe to drink.
Chlorine Dioxide enters the body through inhalation, ingestion (as a liquid), or through skin and/or eye contact. It produces irritation in the eyes and/or throat, coughing, wheezing, bronchitis, pulmonary edema, or chronic bronchitis.
Symbols Key
: Preferred method.
: Ship overnight refrigerated.
: Call in advance of sampling to order media.
: A three sample minimum submittal is required.
: Collect using 2 tubes in a series.
: 3M recommended maximum sampling hours.
: Subcontracted analysis.
: Protect samples from light.
: Immediately after sampling remove from cassette and place in glass vial.
: Please send, under separate cover, a sample (bulk) of your particular solvent for use as a reference standard. The bulk sample will be charged the analysis price. Additional analyses and fees may be required to determine the DE for results that do not match a common standard.
: Reported results reflect elemental analysis of the requested metals. Certain compounds may not be solubilized during digestion, resulting in data that may be biased low.
: Analyte is referenced in the published method. If more than one published method is cited, the analyte is referenced in at least one of the methods.
Compatibility Codes
A: Charcoal and carbon disulfide desorption.
B: Treated XAD-2 (2-(hydroxymethyl) piperidine and toluene desorption.
C: Silica gel and 95% ethanol desorption.
D: Tenax and carbon tetrachloride desorption.
E: OVS Sampler and toluene desorption.
F: Charcoal and 5% methanol in methylene chloride.
G: Treated GFF (1-(2 pyridyl) piperazine) and acetonitrile/dimethyl sulfoxide desorption.
U: Universal Solvent GC Method.
Notes
- Each additional compatible metal $21.
- Each additional compatible GC compound $29.
- Each additional compatible acid $30.
- Each additional compatible HPLC compound $46.
- Each additional compatible metals by ICP-MS $29.
- Other additional compatible analyte pricing; see additional compatible analyte column.
- Bulks used as analytical standards for GC analysis will be billed at $77
- A 10% discount is applied to twenty (20) or more identical analyses. This discount can not be combined with any other discounts.
- LOQs listed do not include the desorption efficiency, which could result in higher detection levels. Please call the lab for more information.
- For additional Method information, please refer to the links on Method types.
- Review the published method when determining the correct number of field blanks to submit with your samples.
- The media shelf lives cited are the maximum possible shelf lives. Media should always be used by the expiration date on the label.
The following surcharges will be added to the listed fees based on the following sample turnaround times:
- ** Same Day 200%
- ** Next Day (12pm) 150%
- ** Next Day (6pm) 100%
- ** Second Day 75%
- ** Third Day 50%
- ** Fourth Day 35%