EQUIPMENT RENTALS

The SKC NoiseChek personal Noise Dosimeter measures worker noise safety exposure in the workplace as required to meet regulations and standards for compliance. Four parameters can be programmed to run simultaneously. Data is easily downloaded using SKC Data trac. 

Standards – ANSI S1.25.1991 and IEC 61252:2017

Microphone – size 1/2in, type 2

Range – 70-140db with a peak 143db

Data logging – 1 second to 60 seconds 

4000+ hrs of stored log time.     

This instrument is rated as intrinsically safe. 

Link to software DataTrac

https://www.skcinc.com/products/noisechek-noise-dosimeter 

The SKC NoiseChek personal Noise Dosimeter measures worker noise safety exposure in the workplace as required to meet regulations and standards for compliance. Four parameters can be programmed to run simultaneously. Data is easily downloaded using SKC Data trac. 

Standards – ANSI S1.25.1991 and IEC 61252:2017

Microphone – size 1/2in, type 2

Range – 70-140db with a peak 143db

Data logging – 1 second to 60 seconds 

4000+ hrs of stored log time.     

This instrument is rated as intrinsically safe. 

Link to software DataTrac

https://www.skcinc.com/products/noisechek-noise-dosimeter 

Depending on inventory, clients may receive the Casella dbadge2 or TSI Edge eg5 when requesting noise dosimeters with wire-free microphones.

Ideal for making noise exposure measurements, the dBadge2 is a shoulder worn dose meter that
measures all workplace noise parameters simultaneously.

Key Features
• Airwave software to check monitoring remotely
• Multiple ‘simulated’ dosimeters
• Full color display
• Motion Sensing
• 1 second time history profiling
• Pause function
• Measures all noise dose
parameters simultaneously

Link to Noise Safe software: https://www.casellasolutions.com/us/en/support/product-support/dBadge2.html

There is an additional charge for SGS Galson to download your data which is $50 for up to 5 units, $100 for 6-10 units and $150 for 11-15 units.

This instrument is rated as intrinsically safe.

Spec Sheet

Depending on inventory, clients may receive the Casella dbadge2 or TSI Edge eg5 when requesting noise dosimeters with wire-free microphones.

Ideal for making noise exposure measurements, the dBadge2 is a shoulder worn dose meter that
measures all workplace noise parameters simultaneously.

Key Features
• Airwave software to check monitoring remotely
• Multiple ‘simulated’ dosimeters
• Full color display
• Motion Sensing
• 1 second time history profiling
• Pause function
• Measures all noise dose
parameters simultaneously

Link to Noise Safe software: https://www.casellasolutions.com/us/en/support/product-support/dBadge2.html

There is an additional charge for SGS Galson to download your data which is $50 for up to 5 units, $100 for 6-10 units and $150 for 11-15 units.

This instrument is rated as intrinsically safe.

Spec Sheet

The TSI SoundPro DL with 1/1 or 1/3 octave band analyzer combines the advanced hand held sound level meter and real-time frequency analyzers. Please be sure to specify which type of OBA you need (1/1 or 1/3). It displays 1/1 octave analysis measurements in filter band and broadband values for both meters 1 and 2. The screen contains 13 bars with 11 filter bands and 2 for broadband.

DMS software may not be compatible when using on tablets.There is an additional charge for SGS Galson to download your data which is $50 for up to 5 like units, $100 for 6-10 like units and $150 for 11-15 like units. If exported files are required the fees are $50 per file per unit.

This instrument is NOT rated as intrinsically safe. 

Spec Sheet

The TSI SoundPro SE/DL series of sound level meters, when used with DMS applications software, is an innovative sound level meter that you can use to simply and reliably perform your advanced noise analysis. All meters include two virtual sound level meters to simultaneously measure multiple regulatory requirements.

DMS software may not be compatible when using on tablets. There is an additional charge for SGS Galson to download your data which is $50 for up to 5 like units, $100 for 6-10 like units and $150 for 11-15 like units. If exported files are required the fees are $50 per file per unit.

This instrument is NOT rated as intrinsically safe. 

Spec Sheet

The acoustic calibrator provides quick, precise field calibration. The calibrator generates a constant sound pressure level of 114 dB at a fixed frequency of 1,000 Hz to verify the accuracy of the meter in the field. Adapters available for all SGS Galson sound level meters and noise dosimeters.
* Included at no charge if requested with noise dosimeter 5-packs.

This instrument is NOT rated as intrinsically safe. 

Spec Sheet

The NoisePro® DLX (Type 2) noise dosimeter measures and reports basic noise exposure data using backlit LCD display and intelligent user interface. It provides easy access to data and setup information including (4) virtual noise dosimeters to measure (4) separate noise standards. 5 Unit per package order. This pack comes with an acoustic calibrator at no additional charge.

DMS software may not be compatible when using on tablets.There is an additional charge for SGS Galson to download your data which is $50 for up to 5 like units, $100 for 6-10 like units and $150 for 11-15 like units.

This instrument is rated as intrinsically safe. 

Spec Sheet

The NoisePro® DLX (Type 2) noise dosimeter measures and reports basic noise exposure data using backlit LCD display and intelligent user interface. It provides easy access to data and setup information including (4) virtual noise dosimeters to measure (4) separate noise standards. Single unit order.

DMS software may not be compatible when using on tablets.There is an additional charge for SGS Galson to download your data which is $50 for up to 5 like units, $100 for 6-10 like units and $150 for 11-15 like units.

This instrument is rated as intrinsically safe. 

Spec Sheet

The NoisePro® DL (Type 2) noise dosimeter measures and reports basic noise exposure data using backlit LCD display and intelligent user interface. It provides easy access to data and setup information including (2) virtual noise dosimeters to measure (2) separate noise standards. 5 Unit per package order. This pack comes with an acoustic calibrator at no additional charge. 

DMS software may not be compatible when using on tablets.There is an additional charge for SGS Galson to download your data which is $50 for up to 5 units, $100 for 6-10 units and $150 for 11-15 units.

This instrument is rated as intrinsically safe. 

Spec Sheet

The NoisePro® DL (Type 2) noise dosimeter measures and reports basic noise exposure data using backlit LCD display and intelligent user interface. It provides easy access to data and setup information including (2) virtual noise dosimeters to measure (2) separate noise standards. Single unit order.

DMS software may not be compatible when using on tablets.There is an additional charge for SGS Galson to download your data which is $50 for up to 5 units, $100 for 6-10 units and $150 for 11-15 units.

This instrument is rated as intrinsically safe. 

Spec Sheet

Depending on inventory, clients may receive the TSI Edge eg5 or Casella dbadge2 when requesting noise dosimeters with wire-free microphones.

The Edge eg5 model is a cable-free personal noise dosimeter with Intrinsic Safety approvals from MSHA, SIRA (ATEX), CSA (US and Canada), and Simtars (IECEx) for use in potentially hazardous environments such as mines, petrochemical sites, and manufacturing facilities. The Edge eg5 noise dosimeter offers users a lighter, more ergonomic method to monitor noise levels with its compact contoured design, advanced feature set and intrinsic safety certification. New and improved DMS software is provided for clear, easy-to-read reports. This pack comes with an acoustic calibrator at no additional charge. 

DMS software may not be compatible when using on tablets.There is an additional charge for SGS Galson to download your data which is $50 for up to 5 units, $100 for 6-10 units and $150 for 11-15 units.

This instrument is rated as intrinsically safe. 

Spec Sheet

Depending on inventory, clients may receive the TSI Edge eg5 or Casella dbadge2 when requesting noise dosimeters with wire-free microphones.

The Edge eg5 model is a cable-free personal noise dosimeter with Intrinsic Safety approvals from MSHA, SIRA (ATEX), CSA (US and Canada), and Simtars (IECEx) for use in potentially hazardous environments such as mines, petrochemical sites, and manufacturing facilities. The Edge eg5 noise dosimeter offers users a lighter, more ergonomic method to monitor noise levels with its compact contoured design, advanced feature set and intrinsic safety certification. New and improved DMS software is provided for clear, easy-to-read reports.

DMS software may not be compatible when using on tablets.There is an additional charge for SGS Galson to download your data which is $50 for up to 5 units, $100 for 6-10 units and $150 for 11-15 units.

This instrument is rated as intrinsically safe. 

Spec Sheet