NOTE: All prices include media and free pump loan, unless otherwise noted.
1,3- ButadieneFEE PER SAMPLE: $63.00Additional Analyte Fee: METHOD:mod. NIOSH 1024; GC/FID A minimum air volume of 30L is required to meet 1/10 the OSHA PEL. Separate tubes after sample collection. Samples must be chilled to below 4 degrees C during storage and shipment. Interferences: pentane, methyl acetylene, and vinylidene chloride when present at high concentrations and high humidityANALYTICAL TECHNIQUE:GC/FIDCOLLECTION MEDIUM:CharcoalORDER NUMBER:226-37VOL. / TIME / AREA / MASS:5-25 LSAMPLING RATE:0.01-0.5 LPMLOQ:5 ug
1,3- ButadieneFEE PER SAMPLE: $63.00Additional Analyte Fee: METHOD:mod. OSHA 56; GC/FID ANALYTICAL TECHNIQUE:GC/FIDCOLLECTION MEDIUM:Treated CharcoalORDER NUMBER:226-73VOL. / TIME / AREA / MASS:3 LSAMPLING RATE:0.05 LPMLOQ:2 ug
1,3- Butadiene FEE PER SAMPLE: $63.00Additional Analyte Fee: $28.00METHOD:mod. NIOSH 1024; GC/FID BADGE For best sampling results, include the charcoal scavenger packet with your returned sampling media. Manufacturer recommends returning samples to the laboratory within 14 days of the sampling event. For the 566 badge a minimum sampling time of 90min is required to meet the OSHA PEL. For the 566 badge a minimum sampling time of 45min is required to meet the TLV. Manufacturer does not recommend sampling on the 521 badge for this compound unless very low concentrations are expected. Recommended badge is the 566.ANALYTICAL TECHNIQUE:GC/FIDCOLLECTION MEDIUM:PMORDER NUMBER:N566/ N521VOL. / TIME / AREA / MASS:15 min. -12 hrs.SAMPLING RATE: --LOQ:2.5 ug
Butadiene Sampling & Analysis
Butadiene comes in the form of a colorless gas with a mild aromatic/gasoline-like odor.It is used in the manufacture of synthetic rubber and other chemical compounds.It is also present in automobile emissions.
The substance enters the body through inhalation or skin/eye contact.It irritates the eyes, nose, and throat; it also induces drowsiness and dizziness.In its liquid form, it can cause frostbite.